Sun Microsystems Sun Quad manual # ndd /dev/qfe \?

●To list all the parameters supported by the qfe driver, type ndd /dev/qfe \?. (See TABLE B-1through TABLE B-8for parameter descriptions.)

#ndd /dev/qfe \?

?

transceiver_inuse link_status link_speed link_mode

ipg1

ipg2

use_int_xcvr pace_size adv_autoneg_cap adv_100fdx_cap adv_100hdx_cap adv_10fdx_cap adv_10hdx_cap autoneg_cap 100fdx_cap 100hdx_cap 10fdx_cap 10hdx_cap lp_autoneg_cap lp_100fdx_cap lp_100hdx_cap lp_10fdx_cap lp_10hdx_cap instance lance_mode ipg0

(read only) (read only) (read only) (read only) (read only)

(read and write) (read and write) (read and write) (read and write) (read and write) (read and write) (read and write) (read and write) (read and write) (read only)

(read only) (read only) (read only) (read only) (read only) (read only) (read only) (read only) (read only)

(read and write) (read and write) (read and write)

FIGURE B-1Example of Listing All Parameters Supported by the qfe Driver

Appendix B Configuring the Quad FastEthernet Device Driver Parameters 33