Specifications | Sun Microsystems Sun Quad specs

Forcing Network Speed Between 10 Mbps and 100 Mbps 16 Auto-Negotiation 17

local-mac-address Property 18

A. Specifications 19

Physical Dimensions 19

Power Requirements 20

Performance Specifications 20

B.Interface Signals 21

C. Configuring the Quad FastEthernet Device Driver Parameters					23
Internal Transceiver 23
Driver Parameter Values and Definitions			24
Defining the Current Status 25
Inter-Packet Gap Parameters		25
Defining an Additional Delay Before Transmitting a Packet Using
	lance_mode and ipg0	26
Operational Mode Parameters		27
Defining the Number of Back-to-Back Packets to Transmit					28
Reporting Transceiver Capabilities			28
Reporting the Link Partner Capabilities				29
Setting qfe Driver Parameters 30
Setting Parameters Using the ndd Utility				30
▼	To Specify the Device Instance for the ndd Utility 31

▼To Select One Local Transceiver Capability and Setting Forced Mode 34

▼ To Set the Mode to Auto-Negotiation 34 Setting Parameters in the /etc/system File 35

▼ Setting the ipg1 and ipg2 Parameters in the /etc/system File 36

viii Sun Quad FastEthernet PCI Adapter Installation and User’s Guide • August 1997

Image 8

Sun Microsystems Sun Quad manual Specifications

Contents

Sun Quad FastEthernet PCI Adapter Installation User’s Guide Please Recycle Regulatory Compliance Statements DOC Class a Notice Avis DOC, Classe a EMC Page Contents Specifications Running Diagnostics Tests Page Preface How This Book Is Organized Unix Commands Related Documents Typographic Conventions Shell Prompts Table P-1SunExpress Contact Information Ordering Sun DocumentsSun Welcomes Your Comments Product Overview 1Sun Quad FastEthernet PCI adapter Features 2Sun Quad FastEthernet PCI adapter Back Panel Checking the OpenBoot Prom Revision Level Displaying the OpenBoot Prom Revision LevelHardware and Software Requirements 1Hardware and Software RequirementsPage Installing the Adapter Using a text editor, add the following line to the end Installing the Adapter Verifying the Installation Ok show-devs Examining Network Activity Rebooting the System Perform a reconfiguration boot on the systemPage Configuring the Host Files Configuring the Driver SoftwareInstalling the Driver Software Etc/hosts file Reboot your system # cat /etc/hosts Booting From the Network At the ok prompt type Post-Installation Procedures Optional Configuring Driver ParametersIncreasing TCP/IP Performance As superuser root, type Forcing Network Speed Between 10 Mbps and 100 Mbps Type Auto-Negotiation Local-mac-address Property Table A-1Physical Dimensions SpecificationsPhysical Dimensions Power Requirements Performance SpecificationsTable A-2Power Requirements Table A-3Performance Specifications Interface Signals Ethernet channelsPage Configuring the Quad FastEthernet Device Driver Parameters Internal Transceiver Driver Parameter Values and Definitions Qfe Driver Parameter, Status, and Descriptions Defining the Current Status Inter-Packet Gap ParametersTable B-1qfe Driver Parameter, Status, and Descriptions Table B-2Read-Only Parameters Defining the Current Status Ipg1 = 8 default at initialization Table B-4Parameters Defining lancemode and ipg0 Operational Mode ParametersTable B-5Operational Mode Parameters Defining the Number of Back-to-Back Packets to Transmit Reporting Transceiver CapabilitiesTable B-6Back-to-back Packet Transmission Capability Table B-7Read-Only Transceiver Capabilities Reporting the Link Partner Capabilities Table B-8Read-Only Link Partner Capabilities Setting qfe Driver Parameters Setting Parameters Using the ndd Utility To Specify the Device Instance for the ndd Utility Use the instance number to select the device Using the ndd Utility in Non-Interactive Mode To modify a parameter value, use the -setoption # ndd /dev/qfe \? Setting Forced Mode Setting Parameters in the /etc/system File Table B-9Setting Variables in the /etc/system File Setting Parameters Using the qfe.conf File Setting the ipg1 and ipg2 Parameters Setting ipg Driver Parameters Using a qfe.conf File Etc/pathtoinst file Set the ipg1 and ipg2 parameters for the above four devices Kernel/drv/qfe.conf file Running Diagnostics Tests Using the OpenBoot Prom FCode Selftest Running the Ethernet FCode Selftest Diagnostic Reset the systemShut down the system Type show-devsto display the list of devices Ok setenv diag-switch? false Set the auto-boot?configuration parameter to true Reset and reboot the system Index EditingEditing, 11 example Creating, 12 editing, 11 examples LEDs Watch-net-all output Page Ordering Sun Documents AIR Mail PAR Avion