▼To Install Windows Server 2008 Using PXE
1.Reset or power on the server, for example:
■From the ILOM web interface, select Reset on the Remote Power Control tab.
or
■Press the Power button (approximately 1 second) on the front panel of the blade to turn off the blade, then press the Power button again to turn on the blade.
The BIOS screen appears.
Note – The next events occur very quickly; therefore, focused attention is needed for the following steps. Watch carefully for these messages as they appear on the screen for a brief time. You might want to enlarge the size of your screen to eliminate scroll bars.
2.Press F8 to specify a temporary boot device. The Please Select Boot Device menu appears.
3.In the Please Select Boot Device menu, select the appropriate PXE installation boot device and press Enter.
The PXE installation boot device is the physical network port configured to communicate with your network installation server.
Chapter 2 Installing Windows Server 2008 Operating System | 15 |
