Care and Cleaning
To clean after use
Always turn the power off and remove the plug from the power outlet and the control probe from the probe inlet before cleaning.
Allow the Flip & Grill™ to cool before cleaning.
Do not cut food on top of the cooking plates.
Do not leave plastic utensils in contact with the cooking plate while in use.
Teflon® Platinum Pro™ Non-Stick Coating
Your grill features a special scratch and
However Sunbeam recommends that care is taken with the
Do not use sharp objects or cut food on the grill. Sunbeam will not be liable for damage to the
The element in the grill plate is cast in, so it is safe to fully immerse in water.
Wash the grill plate in warm soapy water using a mild household detergent and a soft washing sponge.
Do not use abrasives or metal scourers as they may scratch the
A bottle brush may be used to clean the drip holes in the grill plate.
Be sure to clean the handles after each use. The grill plate is also dishwasher safe.
Dry the grill plate and probe inlet thoroughly before storing.
Moulded base
The base can be wiped over with a damp cloth or washed in warm soapy water using a mild household detergent and a soft washing sponge.
Do not use abrasives or metal scourers as they may scratch the exterior surface.
Do not place the moulded base in the dishwasher.
Drip tray
Lift the metal drip tray out from the base and pour any excess grease or liquid into a container and dispose appropriately. Do not pour oil or fats down the sink.
Wash the metal drip tray in warm soapy water using a mild household detergent and a soft washing sponge.
Dry the drip tray thoroughly before storing.
Do not place the metal drip tray in the dishwasher.
Control probe
If cleaning is necessary, wipe over with a damp cloth.
Important: Do not immerse the control probe in water or any other liquid. Do not place the control probe in the dishwasher.
Do not knock or drop the probe as this can damage the probe. If damage is suspected, return the control probe to your nearest Sunbeam Service Centre for inspection.
Note: Before inserting the control probe into the probe inlet, ensure the interior of the inlet is completely dry. To do this wipe interior of probe inlet with a dry cloth or shake out excess water vigorously.
Storage
Allow the grill to cool completely and clean it after each use and dry thoroughly before storing it away.
7
