Sunbeam MX9200 manual Count-up timer, Count-down timer

Using your Café Series® Planetary Mixmaster® Bench Mixer continued

Count-up timer

The count up timer informs you how long your ingredients have been mixing for. The next time you mix the same ingredients you can then set the count-down timer for the specific time.

As soon as you start mixing, the timer will automatically start to count up.

The maximum mixing time is 20 minutes and will be displayed on the LCD screen as “20:00” (twenty minutes, zero seconds).

The mixer will automatically stop mixing after 20 minutes and beep twice.

The screen will flash for about 5 seconds.

The timer will automatically re-set to “00:00”.

The LCD screen will display the speed setting that it stopped at and this setting will continue to flash.

If you pause the mixer at any time during the

mixing process by pressing the button at the front of the speed control dial, the mixing time displayed on the LCD screen will flash until you resume mixing by pressing the button again.

To reset the timer to “00:00”, turn the speed control dial anti-clockwise to the “0” location or, when paused, press the ‘+’ and ‘-’buttons simultaneously.

Count-down timer

The count-down timer is especially useful when following a recipe that specifies mixing times.

The ‘+’ and ‘-’buttons allow you to choose the desired mixing duration. Press the ‘+’ button and you will add 30 seconds. Press the ‘-’button and you will reduce the previously set mixing time by 30 seconds.

For example, if a recipe calls to “beat for

2minutes”, you can set the count-down timer to 2 minutes. Simply press the ‘+’ button until “02:00” is displayed on the LCD screen, i.e. press the ‘+’ button four times.

If you would like to change the countdown time after your initial setup, press the button, then press the ‘+’ and ‘-’buttons to increase or reduce the mixing time to the nearest 30 sec increment.

For example, you set the count-down timer to 3 minutes and turn the speed control dial to start mixing on a chosen speed. After 1 minute, 25 seconds, you pause the mixer by

pressing the button. The LCD displays the remaining count-down time of 01:35. If you now press the ‘+’ button once to increase the mixing time, the display will show 02:00 (which is the nearest 30 sec increment).

To reset the timer to “00:00”, turn the speed control dial anti-clockwise to the “0” location or, when paused, press the ‘+’ and ‘-’buttons simultaneously.

When the chosen mixing time is completed, the mixer will beep twice to inform you that the time has expired. It will stop mixing automatically. The timer display “00:00” and the LCD screen will flash for about 5 seconds. The LCD screen will display the speed setting that it stopped at and this setting will continue to flash.

9