Sunbeam MX9200 manual Using your Café Series Planetary Mixmaster Bench Mixer

Using your Café Series® Planetary Mixmaster® Bench Mixer continued

Figure 4

4.Place the bowl on the base with the handle facing you. Then gently rotate the bowl

in a clockwise direction until it locks into position (Fig 3). The bowl should feel firm with no movement.

5.Lower the mixer head with the selected mixing attachment in place into the mixing bowl. Press the ‘head release’ button to un-lock it from its position and ease the mixer head down (Fig. 4).

Figure 5

6.The splashguard can now be placed over the bowl if desired (Fig 5).

Using your Planetary Mixmaster® Bench Mixer

1.Position the mixer on a level, dry surface such as a bench top. Ensure the mixing bowl is in place and the desired attachment is inserted.

2.Plug the power cord into a 230/240 Volt AC power outlet.

3.A beep will sound and the LCD screen will light up to inform you that the mixer is now switched on. The LCD screen will flash three times and the timer will display “00:00”. The screen will also display the speed setting. If the LCD displays a speed setting other than “0” and continues to flash, you may turn the speed control dial anti-clockwise to the “0” position to re-set the speed setting.

4a. If using the splashguard, add ingredients to the mixing bowl through the pouring shoot.

4b. If using the mixer without the splashguard, release the mixer head out of its locked position and ease it backwards until it locks into its tilt position. Add ingredients to the mixing bowl. Then, un-lock the mixer head and lower it forward into the mixing bowl.

5.Turn the speed control dial clockwise to commence mixing (Fig. 6), or, if a speed

is already set, press the button.

Figure 6

7