Sunbeam’s Safety Precautions
SAFETY PRECAUTIONS FOR YOUR SUNBEAM CAFÉ SERIES BLENDER PB9800.
•Ensure fingers are kept well away from the blades when in use. The processing baton may be used while the motor is running with the main part of the lid in place.
•Always operate on a flat level surface.
•Ensure the control dial is in the “OFF” position and the jug is in place before plugging into the power outlet.
•Do not operate on low speed for more than 30 seconds at a time when blending heavy loads.
•Always remove the plug from the power outlet when the blender is not in use, before disassembling, putting on or taking off parts, and before cleaning other than washing the jug.
•Blade is sharp, handle carefully.
•Always operate the blender with the lid in place.
•When using heavy loads, the blender should not be operated for more than 15 seconds. This does not apply to any of the recipes detailed in this instruction booklet.
•Do not place the blade assembly onto the motor base without it being correctly fitted to the jug.
•The maximum load capacity of the jug is 2 litres, and substantially less with thick mixtures.
•When making peanut butter (or other nut butters, or oil based foods) do not process for more than one minute after mixture starts circulating.
•Jug should not be more than 2/3 full when the processing baton is left in place while blending. Do not exceed 30 seconds of continuous blending with processing baton in place.
•The blender is fitted with a safety switch to prevent the motor operating unless the jug is in place.
•Do not blend warm/hot ingredients. Allow ingredients to cool to room temperature before placing in jug.
4
