Sunbeam SM8700 manual Charging your StickMaster Cordless Stick Blender

Models: SM8700

1 20
Download 20 pages 3.94 Kb
Page 8
Image 8
Charging your StickMaster® Cordless Stick Blender

Charging your StickMaster® Cordless Stick Blender

The stick blender will be partly charged during production. Sunbeam recommend that you charge your stick blender before you use the appliance for the first time, or when the left LED lights up red and starts flashing to indicate that the batteries are low.

The charging time from a flat to a fully charged battery is approximately 90 minutes.

1.Insert the adaptor into the adaptor inlet and plug the adaptor into a suitable mains outlet and switch on.

2.Place the motor housing in the charging stand. Make sure the left LED starts flashing blue to indicate that the appliance is charging.

The adapter feels warm during charging. This is normal.

When you charge the appliance for the first time or after a long period of disuse, let the battery fully recharge. When charging the battery from a flat condition, the left LED will start flashing blue. See Figure 4.

As the charging process continues, the left LED will stop flashing and light up blue continuously with the middle LED flashing blue. See Figure 5.

Figure 5

Figure 4

6

Page 8
Image 8
Sunbeam SM8700 manual Charging your StickMaster Cordless Stick Blender