Adjusting On-Screen Displays – Setup Menu
Setup Menu
1.Press qp buttons to move the cursor to the item to be selected.
2.Press t u buttons to make the desired adjustments.
3. When you are satisfied with your adjustments, press MENU or EXIT to exit the main menu.
Setup Menu
Advanced Sub Menu
Page 24
Menu language
Press qp buttons to Menu Language, then use t
ubuttons to select menu language, the options are English / French / Spanish.
Transparency
Press qp buttons to Transparency, then use t u buttons to select Transparency ON or OFF.
Zoom Mode
Press qp buttons to Zoom Mode, then use t u buttons to select current zoom mode, the options are Normal / Wide / Zoom / Cinema.
Noise Reduction
Press qp buttons to Noise Reduction, then use t u buttons to select current noise reduction level, the options are off / Weak / Middle / Strong.
Advanced
Press qp buttons to Advanced, then press u button to enter the Advanced Sub Menu shown below Note: This item is only available in VGA source input.
H-Pos
Press qp buttons and then use t u adjust the horizontal position of the picture (this function is to adjust the picture to Left/Right as to your preference).
Press qp buttons and then use t u adjust the vertical position of the picture (to adjust the picture to Left/Right as to your preference).
Clock
Press qp buttons and then use t u to adjust the clock of the picture. (This function is to minimize any vertical bars or stripes visible on the background screen. The horizontal screen size will also change.
Phase
Press qp buttons and then use t u to adjust the phase of the picture. (This function allows you to remove any horizontal noise and to sharpen the image of characters).
Auto
Press qp buttons and then press OK button to perform the Auto Adjust function that automatically adjusts the available options for the best viewing configuration.
