Setting the MultiViewer
Event Log Screen
1 | 2 | 3 | 4 | 5 | 6 |
1Time: Display the data and time of creating the log file.
2Target: Display information on the Netcam(W) server.
3IP Address: Display the Netcam(W) IP address.
4Mac address: Display the Netcam(W) Mac address.
(Displayed on the label on the top of the main body)
5Event Mode: Display log information based on status.
Reconnected, Motion and Forced Alarm and Disconnected
6File Folder: Display the location where the recorded file is stored.
Setting the Viewer Environment
1 Click the MultiViewer SetButton on the MultiViewerScreen.- The Setup Screen appears.
1
2 Click the Viewer Setup Tab.- The MultiViewer Set Screen
2 appears.
3 Click the Close Button when the settings are completed.94 | 3 |
95 |