Netcam(W)_SNC-L200(W)

Netcam(W)_SNC-L200(W)

Using the MultiViewer

Recording Motion

Set the motion area in the 16-split video, and automatically record video when a motion is detected in the set area. This function is applied to only one channel.

6 Set the most appropriate value by repeating the step 3 to 5.
7 Click the “Enable Motion Detection” to
display the motion detection.

3

5

4

1Click the video you want to motion-record on the MultiViewer Screen.2Click the Motion Button( ).

-The Motion Record Screen appears.

3Click the Motion area in the 16-split screen.

-The motion area is displayed in green color.

-Click the button again to clear the motion area.

- The motion detection is selected.

- To clear the motion detection, click the

button again and clear the display.

8 Click the OK Button.

- Settings are completed.

78

When a motion is detected in the motion area

The motion area turns red, and blinks. Recording starts automatically.

- The REC-F is displayed on the screen, and video is recorded for up to 10 minutes.

4Enter the Sensitivity Value.

-Enter a value between 1 and 10.The level of sensitivity increases close to 10.

5Click the Pretest Button.

-The Sensitivity Setting Value is temporarily stored.

-When a motion is detected, the motion area turns red, and blinks.Testing starts.

Note

The Motion Detection detects and records a motion, while the PIR

detects infrared.

86

87