Netcam(W)_SNC-L200(W)

Netcam(W)_SNC-L200(W)

Network Configuration

Network Status Notification

Automatically informs the user of a cable modem or ADSL of a new IP address via mail when the link IP address changes.

1

2

3

4

5

6

7

8

1Mail Notification: Decide whether to use this service. When selecting Enable, you can use the Mail Notification function.

2SMTP Server: This address is used to send E-mail to the SMTP(Simple Mail Transfer Protocol) Server. Enter the latter part (after @)of the E-mail address you use.

3Authentication Login: Select Enable to use the log-in screen. It is recommended to select Enable.

4User ID: Enter the User ID of the sender ’s E-mail address when using the Authentication Login.

5Password: Enter the User Password of the sender ’s E-mail address when using the Authentication Login.

6Sender: Enter the sender ’s E-mail address.

7Recipient ’s Email Address1~3: Enter up to 3 mail addresses to receive the changed IP address.

8User-defined Message: Enter the message to be sent with the mail. Up to 50 characters can be entered per line.

DDNS Configuration

Automatically switch the IP address of the Netcam(W), and access the new address.

Default setting of the DDNS server is websamsung. net.The domain name is http: //w(Mac address last 6 numbers). websamsung. net.

If you register the domain name of the link IP of the Netcam(W) on our DDNS server as with cable modem and ADSL, you can access the Website more conveniently.

64

65