Netcam(W)_SNC-L200(W)

Netcam(W)_SNC-L200(W)

Utilities

< Utility Sub Menu >

- Save Configuration: Store the

settings in flash memory.

- Reboot: Re-boot the system.

- Factory Default: Restore the

settings to factory default.

- System Update: Update the

system.

Save Configuration

Store the settings in the memory of Netcam(W),and save them when power is turned off or the system is re-booted.

- To store settings in the memory, click the Save Button.

Press the Reset Button on the back of the Netcam(W) for more than

Note

5 seconds to return to default settings. Then, settings stored in

 

 

memory are erased.

Reboot

Factory Default

System Update

Reboot the system so that settings are applied to the Netcam(W). Reboot the system after using the “Save Configuration” or “System Update.”

Connection with the

Warning Netcam(W)rebooting. is cut during

Close Internet Explorer, and access the Internet again after 1 minute.

Used to restore settings to factory default.

Do not use this function

Warning unless necessary. All the stored settings are switched to factory default.

You can update firmware in two ways.

-Normal Update: Update to the latest version of software for improving performances.

-All Update: Seldom used. It updates the system to repair a serious defect such as program bug.

66

67