Netcam(W)_SNC-L200(W)

Netcam(W)_SNC-L200(W)

Using the Smart Viewer

Preset

 

Passive Infrared (PIR)

 

 

Detects and records motion of a human or an animal by using an infrared ray and

 

captured images.

To Set Preset

You can store up to 8 lens directions,thereby restoring the lens to the originally stored position after movement.

1Select the Preset Number ( ) to be set.

2Move the lens to the desired store position by using the lens direction button.

3 Click the Preset Store Button (

).

4 Repeat steps 1 to 3 if you want to store another number.
Click the PRI Button.

-PIR is displayed on the screen, and the sensor starts operating.

-When a motion is detected, the flash is turned on automatically to capture images.

- You can choose the number of frames to be captured from 1 to 5

Note in the Alarm Notification Settings.You can also send the captured images via E-mail.

-PIR may malfunction depending on temperature or surroundings, since it detects changes in temperature from infrared (heat).

To operate Preset

1Select the Preset Number ( ).2Click the Preset Operation Button ( ).

To Delete Preset

1Select the Preset Number ( )to be deleted.2Click the Preset Delete Button ().

Flash

You can monitor at night or in a dark room by using the Flash.Click the Flash Button.

-The Flash is displayed on the screen. It is turned on for 5 seconds and off for 30 seconds.

-Flash is not turned on again for 30 seconds, even if you click the Flash Button during that time.

46

47