Netcam(W)_SNC-L200(W)

Power Connection

Connect power by using the power adapter and cord provided as accessories of this product.

3

Power LED

12

Back of Main Body

Power Adapter

1Connect the power adapter to the power connector of the Netcam(W).2Connect the jack of the power cord to the power adapter.3Insert the power plug to the wall outlet.

-When power is connected,power LED (red)is turned on,and the lens automatically moves after 2 minutes.

CAUTION

Use only power supply, Manufacturer : Dongyang E&P, Model : AA-E8 (SNC-L200)

Note Use the power adapter provided by the manufacturer. (DC8.4V/1A)

Netcam(W)_SNC-L200(W)

Opening the Back Cover/Arranging Cable

Learn how to open the back cover and arrange the cable.

➞B

A

➞

 

Top Cover

1 Push the back over with two hands to open it.2 Connect the power cable to the power connector and the LAN connector.3 Close the cover after aligning the cable with the wiring groove.4 Arrange the cable.

- Arrange the cable in direction B when installing the camera on the wall.

- Arrange the cable in direction A when installing the camera in Standing position.

18

19