Samsung SNC-L200P manual Network Configuration, Ddns Configuration Set the Ddns

Netcam(W)_SNC-L200(W)

System Configuration

Alarm Notification

Capture images and send them via E-mail when a motion is detected by PIR.

1

2

3

4

5

6

7

8

9

1Service: Set whether to enable this service. Select Enable to use the Alarm Notification.

2SMTP server address: Used to send E-mail to the address on SMTP (Simple Mail Transfer Protocol)Server. Enter the SMTP server address and your personal e-mail address (only the part after ‘@’). ex) smtp.samsung.com

3Authentication Login: Select the Enable to use the log-in screen. It is recommended to select the Enable.

4User ID: Enter the User ID of the sender ’s E-mail address when using the Authentication Login.

5Password: Enter the User Password of the sender ’s E-mail address when using the Authentication Login.

6Sender(E-mail):Enter the sender ’s E-mail address.

7E-mail address 1~4: Enter up to 4 mail addresses to receive capture images.

8Image Count: Set the number of images to be transmitted upon Alarm Notification.

“Pre Alarm” means the number of images to be sent before the Alarm, and “Post Alarm” is the number of images to be sent after the Alarm. Up to 5 images can be sent in a 0.5-second interval.

9PIR is linked with Preset : Select Enable if you want to move the camera lens to the specified Preset 1 when an alarm occurs.

Netcam(W)_SNC-L200(W)

Network Configuration

< Network Configuration Sub Menu >

-Network Configuration: Set the Static IP or the DHCP.

-PPPoE(ADSL): Set the PPPoE(ADSL).

-UPnP Configuration: Set the Port Forwarding and the Display shortcut Icon in My Network Places.

-Network Ports: Set the HTTP Port.

-View Network Status: Display the network status of the current system.

-Network Status Notification: Send information on allocated IP addresses such as the DHCP and the PPPoE.

-DDNS Configuration: Set the DDNS.

58 59