Netcam(W)_SNC-L200(W)

Netcam(W)_SNC-L200(W)

Network Configuration

UPnP Configuration

Set the port number used to access the Netcam(W) over the Internet, and set the display of the Netcam(W) icon in the “My Network Places.”

 

Note

1

 

For the SNC-L200(W)icon of “My

2

 

Network Places,”Windows XP

 

Service Pack 2 must be installed.

Network Port Configuration

Port number used to access the Netcam(W) over the Internet.

3

And the “UPnP

Framework ”in the exception tab of “Controller-Windows Firewall ”must be checked.

You can access the Netcam(W) by double clicking the SNC-L200(W) icon of “My Network Places.”

View Network Status

Check the current connection status of the network.

1 Common Status: Display the status

1Port Forwarding: Select the method of port number allocation. “Enable” is automatic allocation, and “Disable” is not allocating the port number. “User Define” is the user entering the port number.

2Display a shortcut Icon in My Network Places: Decide whether to display the SNC-L200(W) icon of the “My Network Places.”

3UPnP Status (Select the settings of item 1 and 2 above and click Apply to display it)

-Status: Display the status of the UPnP.When succeeding, “Success” is displayed. When failing, “Error” is displayed.

-Port No.: Display the allocated port number.

-Router Global Address: Display the router of the Global IP.

-Camera ‘s address for Local Network Access: Display the address with which the user can access the Netcam(W) over the network.

-Camera ‘s address for Access via Internet: Display the address with which the user can access Netcam(W) from external Internet.

 

 

of the Gateway and the DNS.

1

2

LAN Status: Display the status of the

 

 

 

IP address, the Netmask and the Mac

2

 

address.

3 PPPoE Status: Display the

3

connection status of the ADSL(PPPoE).

Note

The Common Status is information commonly used for all the

interfaces (Ethernet of PPPoE).

 

 

 

62

63