Netcam(W)_SNC-L200(W)

Netcam(W)_SNC-L200(W)

Using the MultiViewer

Sequence View Recording Video

You can record video from each channel by using the MultiViewer.

Video of the connected Netcam(W) is displayed in sequence automatically. Click the Sequence View Button.

-1 Channel:Video is displayed by one channel in sequence.

-4 Channels:Four screens are displayed at the same time,and switched up to four pages in sequence.

-9 Channels:Nine screens are displayed at the same time,and switched up to two pages in sequence.

-16 Channels:No sequence view is enabled.

To clear the Sequence View,click one of the 1/4/9/16 Channel Buttons.

Channels are displayed in the Setup-Sequence time interval,and one by one in sequence.

Note

Sequence View can be set in 5 to 30-second interval in

MultiViewer Mode.

 

 

 

1Select video you want to record on the MultiViewer Screen.2Click the Record Button( ).

-The REC-F is displayed on the screen,and recording begins.

3Repeat the step 1 and 2 to record another video..

-Record video for 10 minutes,creating a recorded file for each Netcam(W).

Stop Record

Press the Record Button( ).

-Stop recording.

-Recorded files are stored in the C: WProgram FilesWNetwork Camera MultiviewerWVideo Files.

Recording is stopped when the free space on the HDD is less

Warning than 5GB. Check the free space on the HDD if it’s sufficient to record video continuously.

Note Record video for up to 10 minutes for each Netcam(W).

84

85