System Configuration
Administrator s Password Configuration
Change the log-in password of the administrator.
1 Administrator ’s ID: Administrator ’s ID
is the root (cannot change)
12 Old Password: Enter the old password.
2It is root when the password is first
3
4
changed or switched to default settings.
< System Setting Sub Menu >
- System Information: Set system information. |
- Admin.Password: Change the password of the administrator. |
- Access Limitation: Control the access of the user. |
- User Registration: Add, modify and delete the ID and password of the user. |
3 New Password: Enter the new password (English/Number, 4 to 20 letters)
4 Confirm Password: Confirm the new
password.
Access Limitation Configuration
Limit general user ’s access to the Smart Viewer.
- Video: Set the quality and resolution of video images. |
- Alarm Notification: Send images via |
System Information
Register and change the name of the Netcam(W) on the server.Check the model and version of the Netcam(W).
1 Server Name: Register the name of the Netcam(W) on the server. Change
1the registered name to a new one.
2(English/Number: less than 20 letters. You cannot use # ” ’ characters.)
3
2 Model: Display the model name of the Netcam(W).
3 Version: Display the system and Web version of the Netcam(W).
- You can check information only when it comes to the model and version.
1
2
3
Note
1Full Access: Everyone can see Smart Viewer video, without having to enter a password. But the user cannot use the function buttons of the Smart Viewer.
2Limited Access: General users are required to enter the password to view Smart Viewer video.
3Maximum Frame Rate: You can set the
Click the Apply Button to complete settings.Then, close Internet Explorer and open it again Enter the password on the
54 | 55 |