Sunfire TGR401, TGR-401-230 manual Surround Back Outputs, Left/Right 2 Outputs, Surround 2 Outputs

CHAPTER 2

TO	+	+
	LEFT
	BACK	TO RIGHT BACK
SURROUND
	(IF ZONE 2	SURROUND
		AMP
		OFF)

+		+	+
TO
S	LEFT	TO LEFT
PEAKER				+
		2	TO RIGHT
		SPEAKER		TO RIGHT 2
			SPEAKER
				SPEAKER

+	+		+	+
TO	TO
LEFT		LEFT
SURROUND2			TO RIGHT
	SURROUND1			TO
SPEAKER			SURROUND2		RIGHT
	SPEAKER
			SPEAKER	SURROUND1
				SPEAKER

22

Surround Back Outputs

The surround back speakers can be connected to these outputs.

If you do not have surround back speakers, or do not want to use them all the time, you can use the TGR-401's intelligent speaker switching to "borrow" the surround back ampli er channels to power your Zone 2 speakers instead. When Zone 2 is powered on, the surround back speakers will turn off in the main zone. Likewise, when Zone 2 is powered off, the surround back speakers in the main zone will automatically turn back on. See the speaker con- nections for Zone 2 on the next page.

You can still use the line-level surround back outputs to run an external amp and power your sur- round back speakers. The line-level Zone 2 outputs can run an external amp and power your Zone 2 speakers.

Left/Right 2 Outputs

If you have two sets of left/right speakers, you can turn one pair on and one pair off. For example, one pair might be a pair for home theater, and one for stereo listening. Using the Binding Posts menu, you can easily switch between each pair.

Surround 2 Outputs

If you have two sets of surround speakers, you can turn one pair on and one pair off. For example, one pair might be a pair of bipole surround speak- ers, and one a pair of conventional surround speak- ers. Using the Binding Posts menu, you can easily switch between each pair. For long theaters with tiered seating, you can also con gure both to be active simultaneously (8 ohm minimum per speaker in this case).

User's Manual