Sunrise Medical F55 owner manual Angle Adjustable Legrest

Angle Adjustable Legrest

Fitting WARNING

Follow the instructions for the fitting and removal of footrests as stated on page

21and the adjustment of the footplates as stated on page 22.

To adjust the angle of the legrest undo the knuckle screw & move legrest to desired position, once in the position re-tighten the screw, see Fig. 20 below.

	Loosen the knuckle
	joint and adjust
	legrest to desired
Fig. 20	angle.

Cleaning Instructions

Footrest - Clean with a damp, soapy cloth.

Paintwork - Clean with a damp, soapy cloth. Do not use abrasive cleaners or cloths.

Make sure that the legrest is completely dry before using.

The use of an angle adjustable legrest can affect the stability of the chair. Be especially careful when riding up or down slopes.

With the leg in an elevated position it is more likely that the user could injure the leg on obstacles in the environment. Make sure that you are aware of your terrain and be cautious when driving the chair that your leg cannot impact on anything around you.

Do not drive your chair too close to any source of open flame. With your leg in an elevated position you may not know that the bottom of the footplate is getting hot.

Do not hang items from the legrest, or allow anyone to stand on the legrest with it in the elevated or non-elevated position. This could cause injury to them, to you or could cause damage to the chair.

Inspect the legrest, footplate and heel loop regularly for signs of damage or wear. Damage to the legrest could result in the users leg being dropped and could cause injury.

Issue 7 24