
Crutch holder (optional extras)
Using a crutch holder.
Your crutch holder (see fig 48) should be fitted by an authorised Sunrise dealer to the lower section of the push handle. A Velcro strip should also be fitted to the top section of the push handle and on at relevent position on your crutch.
Take your crutch and drop it into the cup fitted to the bottom of the push handle. Line up the Velcro strip on the push handle and cruth and push together, firmly fixing the crutch to the chair. See Fig. 49.
Velcro strip
WARNING | Cup | |
Make sure that the crutch is securely | Fig. 49 | |
fastened to the crutch holder. | ||
|
Make sure that the crutch is not interfering with the mechanisms of the chair.
Make sure that the crutch does not protrude from the chair.
Do not attempt to remove the crutch whilst the chair is in motion.
Always come to a complete stop and turn off the power to the controls before attempting to remove the crutch. This will avoid accidentally operating the chair.
Issue 7 | 46 |
|
|