Footrests

Adjusting the footrest length

To adjust the footrest length, remove the screw assembly on the footrest stem as shown in Fig. 16, adjust the length to suit. Replace the bolt assembly and tighten. Ensure the bolt is firmly located and tightened prior to use.

Note: The internal footrest stem may require cutting down in length to allow the footplate position to be raised (Fig. 16). This modification must only be undertaken by an approved Sunrise Medical service agent.

Screw assembly

Fig. 16

Footplates

The footplates may be flipped up to aid entry and exit from the chair (Fig. 17).

WARNING

Do not use the footplates to stand on, as the full weight of your body may cause the chair to tip forwards, and could damage the footrests.

Footplates in up position

Fig. 17

Issue 7

22

 

 

Page 24
Image 24
Sunrise Medical F55 owner manual Adjusting the footrest length, Footplates