
Preparing your wheelchair for use
Power lead attachment
The power lead must also be plugged into the socket as shown in Fig. 3.
WARNING
When unplugging the power lead pull off by gripping the outer plastic cover. Never pull the cable to disconnect the plug.
Attaching the rear view mirror
1.Firstly set the Pilot Plus remote pod arm into the desired position.
2.Place the metal clamp over the remote arm, between the adjust bracket and the rubber gaiter of the Pilot Plus swing- away. The holes must be toward the outside of the chair.
3.Place the mirror through the clamp holes and then, using the locking handle, begin to tighten the mirror in position.
4.The mirror should stand vertically once in position but can be subsequently adjusted by slackening off the locking handle, adjusting the mirror and then
Always make sure that when using the mirror that it is clean and unbroken so that it does not impair your visibility.
Power supply
Outer cover
Fig. 3
Fig. 4
WARNING
To avoid injury to people around you please be aware that the mirror protudes outside the space envelope of the chair and could cause injury to someone when driving past.
Themirrormustbeusedonthe10KPHmodel on UK roads.
15 | Issue 7 |
|
|