The Penny and Giles Pilot + control pod
Adjustable speed setting
Your controller has five speed settings. To adjust:
1. Press the mode button until the speed settings indicator is flashing (Fig. 35).
2.Increase or decrease the speed setting by pushing the joystick to the
left or right respectively, until the required setting is obtained. To activate the setting either push the joystick forwards to drive or press the mode button until the flashing lights are no longer flashing.
3.When the third or middle speed indicator light is selected on a 10 km/
h chair, the vehicle is set at 4mph.
Please note that this is the maximum speed permitted for pavement travel.
Battery level indicator | Fig. 35 |
|
This has ten colour coded lights, 3 red,
4 orange, and 3 green, and denotes the state of charge of the batteries (Fig. 36). Green is high, Orange is low, and Red is dangerously low. The most accurate reading is attained when the chair is stationary and on a level surface. The lights also help indicate the position of a fault (should the need arise). When in fault, the lights will flash quickly. Noting the number of lights flashing may help your service agent in simple fault finding.
Adjustable speed setting indicator
Fig. 36
35 | Issue 7 |
|
|
