A+ SERVER
5-10 Onboard Indicators
LAN1/LAN2 LEDs
The Ethernet ports (located beside the VGA port) have two LEDs. On each Gb LAN port, one LED blinks to indicate activity while the other may be green, amber or off to indicate the speed of the connection. See the table on the right for the functions associated with the connection speed LED.
LAN LED
(Connection Speed
Indicator)
LED Color | Definition |
|
|
Off | 10 MHz |
Green | 100 MHz |
Amber | 1 GHz |
|
|
Dedicated IPMI LAN LEDs
A dedicated IPMI LAN is also included on the
BMC Heartbeat LED
A BMC (Baseboard Management Control) Heartbeat LED is located at DP1 on the motherboard. When DP1 is on, the BMC Controller functions normally. See the tables at right for more information.
Power LED
DP2 is an Onboard Power LED. When this LED is lit, it means power is present on the serverboard. Be sure to turn off the system and unplug the power cord(s) before removing or installing components.
UID LED (LE1)
A rear UID LED Indicator, located at LE1, works in conjunction with the rear UID switch to provide easy identification for a unit that might be in need of service. Refer to Page
IPMI LAN Link LED (Left) &
Activity LED (Right)
Color | Status | Definition |
|
|
|
Green: | Link | 100 Mb/s |
Solid | (Left) |
|
Amber: | Activity | Active |
Blinking | (Right) |
|
|
|
|
BMC Heartbeat (DP1)
LED Settings
Color | Status | Definition |
|
|
|
Green | Blinking | BMC: Normal |
Off | Off | Not functioning |
|
| normally |
|
|
|
| Power LED (DP2) |
|
|
State | System Status |
|
|
On | Standby power present on |
| motherboard |
Off | No power connected |
|
|
