![](/images/new-backgrounds/1108698/10869859x1.webp)
SUPERSERVER
3-3 Control Panel LEDs
The control panel located on the front of the
OVERHEAT: Indicates an overheat condition in the chassis. This may be caused by cables obstructing the airflow in the system, or the ambient room temperature being too warm. You should also check to make sure that the chassis cover is installed and that all fans are present and operating normally. Finally, check the air seals for damage. The air seals are located under the fans and beneath the frame cross section that separates the drive bay area from the motherboard area of the chassis.
NIC2
NIC2: Indicates network activity on GLAN2 when flashing .
NIC1
NIC1: Indicates network activity on GLAN1 when flashing.
HDD: Channel activity for all HDDs. This light indicates