SUPER MICRO Computer 5015M-UR, 5015M-NTR LAN Enable/Disable, Watch Dog Enable/Disable

SUPERSERVER 5015M-UR/5015M-U/5015M-NTR/5015M-NT User's Manual

LAN Enable/Disable

Change the setting of jumper JPL1 or JPL2 to enable or disable the onboard Ethernet (RJ45) ports LAN1 and LAN2, respectively. See the table on the right for jumper settings. The default setting is enabled

Watch Dog Enable/Disable

JWD controls the Watch Dog function. Watch Dog is a system monitor that can reboot the system when a software application is “hung up”. Pins 1-2 will cause WD to reset the system if an application is hung up. Pins 2-3 will generate a non-maskable interrupt sig- nal for the application that is hung up. See the table on the right for jumper settings. Watch Dog must also be en- abled in BIOS.

Note: When enabled, the user needs to write their own application software to disable the Watch Dog Timer.

LAN Enable/Disable

Jumper Settings (JPL1, JPL2)

Jumper Setting	Defi nition
Pins 1-2	Enabled
Pins 2-3	Disabled

Watch Dog

Jumper Settings (JWD)

Jumper Setting	Defi nition
Pins 1-2	Reset
Pins 2-3	NMI
Open	Disabled

Power Force On Enable/ Disable

Jumper JPF allows you to enable or disable the Power Force On function. If enabled, the power will always stay on automatically. If this function is disabled (the normal setting), the user needs to press the power button to power on the system.

Power Force On

Enable/Disable

Jumper Settings (JPF)

Jumper Setting	Defi nition
Open	Normal
Closed	Force On

5-20