Flashing IT Firmware
1.Download the appropriate IT firmware from the web site: ftp://ftp.supermicro.com/driver/SAS/LSI/Firmware/IT/
2.Unzip it to a bootable floppy or USB pen.
3.With JPS1 on (closed) boot to the device with the unzipped firmware and type "clear" to erase the SR firmware.
4.Remove AC power and open JPS1.
5.Boot to the disk again and type "H8QM32".
6.When prompted for the SAS address, type in the
7.Power off the system before restarting.
2-8 Onboard Indicators
JLAN1/JLAN2 LEDs
The Ethernet ports have two LEDs. On each Gb LAN port, one LED indi- cates activity when blinking while the other may be amber or off to indicate the speed of the connection. See the table on the right for the speed LED indications.
JLAN LED
(Connection Speed Indicator)
LED Color |
| Definition |
Off |
| 10/100 Mb/s |
| ||
Amber |
| 1 Gb/s |
| ||
|
|
|
Onboard Power LED (DP2)
DP2 is an Onboard Power LED. When this LED is lit, it means power is pres- ent on the serverboard. In suspend mode this LED will blink on and off. Be sure to turn off the system and unplug the power cord(s) before removing or installing components.
SAS Activity LED (LES1)
LES1 (included on the
