SBI-7226T-T2 Blade Module User’s Manual
SouthBridge Configuration
The menu options in the SOUTHBRIDGE CONFIGURATION submenu and their descriptions are shown in Table
| Table | |
|
| |
Menu Option | Description | |
USB Functions | This setting Enables or Disables USB Functions for the system. Disabling this | |
setting allows you to configure the USB 2.0 Controller setting. | ||
| ||
USB Port Configure | This setting allows you to specify the USB ports for your system when the USB | |
Functions setting is enabled. Options include 6x6 USB Ports and 8x4 USB | ||
| Ports. | |
USB 2.0 Controller | This setting is only active when the USB Functions setting is disabled. It allows | |
you to Enable or Disable the USB 2.0 Controller. | ||
| ||
|
| |
USB Configuration |
| |
USB |
| |
Configuration | This static display shows Module Version and USB Devices Enabled information. | |
Information | ||
| ||
(Static) |
| |
|
| |
Legacy USB | Select Enabled to enable the support for USB Legacy. Disable Legacy support if | |
there are no USB devices installed in the system. AUTO disables Legacy support | ||
Support | ||
if no USB devices are connected. The options are DISABLED, Enabled and AUTO. | ||
| ||
USB 2.0 | Select the controller mode for your USB ports. Options are HiSpeed and | |
Controller Mode | FULLSPEED. (HiSpeed=480 Mbps, FullSpeed=12 Mbps). | |
BIOS EHCI | Enable or DISABLE a workaround for OS's without EHCI | |
| ||
Legacy USB 1.1 | This setting allows you to Enable or Disable Legacy USB 1.1 HC support. | |
HC Support | ||
| ||
|
| |
Hotplug USB FDD | This setting allows you to create a dummy FDD device that will be associated | |
Support | with the hotplugged FDD later. The Auto option creates this dummy device only if | |
there is no USB FDD present. Options include Auto, Enabled and Disabled. | ||
| ||
SMBUS Controller | This setting allows you to Enable or Disable the SMBUS controller. | |
|
| |
Restore on AC Power | Use this setting to specify the option for restoring on an AC power loss. Options | |
Loss | include Power Off, Power On and Last State. | |
Power Button | Use this setting to specify the function of the power button when it is turned off. | |
Function | Options include |
