SUPER MICRO Computer SBI-7226T-T2 user manual IDE Configuration Submenu, SATA#1

SBI-7226T-T2 Blade Module User’s Manual

	Table 6-1. CPU Configuration Submenu (Continued)
Menu Option		Description
C1 Auto Demotion		When this setting is enabled, the CPU will conditionally demote C3/C6/C7
		requests to C1 based on uncore auto-demote information. Settings are Enabled
		and Disabled.
		When this setting is enabled, the CPU will conditionally demote C6/C7 requests
C3 Auto Demotion		to C3 based on uncore auto-demote information. Settings are Enabled and
		Disabled.
Spread Spectrum		Use this setting to Enable or Disable Spread Spectrum Mode.
Mode

IDE Configuration

The menu options in the IDE ConfiguraTION submenu and their descriptions are shown in Table 6-2

	Table 6-2. IDE Configuration Submenu
Menu Option	Description
SATA#1	This setting allows you to set your SATA#1 Configuration as either Enhanced,
Configuration	DISABLED or COMPATIBLE.
Configure SATA#1 as	Use this setting to configure SATA#1. Options include IDE, RAID or AHCI.
Max Ports on SATA#1	Use this setting to specify the maximum ports on SATA#1. Options include
	4-ports and 6-ports.
RAID ID Support	If you have selected the RAID setting above, then you may use this setting to
	specify the RAID ID support used. Options include Intel or ADAPTEC.
Hot Plug	If you have selected the RAID setting above, then you may use this setting to
	enable or disable Hot Plugging. Settings are Enabled and Disabled.
Hard Disk Write	Use this setting to Enable or Disable device write protection. This will be
Protect	effective only if device is accessed through the BIOS.
IDE Detect Time Out	This setting allows you to select the time out value for detecting ATA/ATAPI
	devices. Options are 5-second increments between 5 and 35 seconds. Default is
(Sec)
	35.
ATA(PI) 80-Pin Cable	This setting allows you to select the mechanism for detecting an 80-pin ATA(PI)
Detection	cable. Options include Host, Device or Host & Device.

6-4