Chapter 2: Installation
HDD LED
The HDD LED connection is located on pins 13 and 14 of JF1. Attach a hard drive LED cable here to display disk activity (for any hard drives on the system, including SAS, Serial ATA and IDE). See the table on the right for pin definitions.
NIC1/NIC2 LED Indicators
The NIC (Network Interface Control- ler) LED connection for GLAN port1 is located on pins 11 and 12 of JF1 and the LED connection for GLAN Port2 is on Pins 9 and 10. Attach the NIC LED cables to display network activity. Refer to the table on the right for pin definitions.
HDD LED
Pin Definitions (JF1)
Pin# Definition
13+5V
14HD Active
GLAN1/2 LED
Pin Definitions (JF1)
Pin# Definition
9/11 | Vcc |
|
|
10/12 Ground
A. HDD LED
B. NIC1 LED
C. NIC2 LED
Ground
X
Power LED
AHDD LED
BNIC1 LED
CNIC2 LED OH/Fan Fail LED
PWR Fail LED
Ground
Ground
20 | 19 |
| NMI |
| X |
| Vcc |
| Vcc |
| Vcc |
| Vcc |
| Vcc |
| Vcc |
| Reset |
| PWR |
2 | 1 |
Reset Button
Power Button
