SUPER MICRO Computer X7DCL-i VGA Enable/Disable, I2C Bus to PCI/PCI-Exp. Slots, JPI2C1 C. JPI2C2

X7DCL-3/X7DCL-i User's Manual

VGA Enable/Disable

JPG1 allows you to enable or disable the VGA port. The default position is on pins 1 and 2 to enable VGA. See the table on the right for jumper settings.

I2C Bus to PCI/PCI-Exp. Slots

Jumpers JPI2C1/JPI2C2 allow you to connect the System Management Bus (I2C) to PCI/PCI-Exp. slots. The default setting is Open to disable the connec- tion. See the table on the right for jumper settings.

VGA Enable/Disable

Jumper Settings

Both Jumpers	Definition
Pins 1-2	Enabled (Default)
Pins 2-3	Disabled

I2C to PCI/PCI-Exp. Slots
Jumper Settings
Jumper Setting	Definition
Closed	Enabled
Open	Disabled (Default)

JPWF1 1

CPU1 VRM OH LEDA. VGA Enabled

KB/MS	JAR	SMB_PS	Fan
	8-Pin PWR	24-Pin PWR
USB0/1
		DIMM2A
COM1		DIMM1A
		DIMM2B
		DIMM1B
		DIMM2C
VGA		DIMM1C
		X7DCL-3/i
LAN1

LED5

CPU1

B. JPI2C1 C. JPI2C2

LAN2	JPL2
	LAN
	CTRL
	FAN6 FAN5
	I-Button
	LAN
	CTRL
	Slot6 PCI-E x8

JPL1			Slot5 PCI-E x8
C	JI2C2	JI2C1	B

VGA		Slot4 PCI-E x4(in x8 slot)
CTRL	A
JPG1		Slot3 PCI 33MHz

Intel 5100

North Bridge

SP1

Buzzer

Intel

ICH9R

South Bridge

SATA5

JBT1

BIOS

Battery

		JP2
		JP1
SATA-GPIO0		SATA-GPIO1
SATA4	SATA3	SATA2
	JD1

CPU2

		LED6	Fan 2
		CPU2 VRM OH LED
			Fan 3
		PWR LED	CTRL
		LED3
SATA1	SATA0	JPA1	FP
		LED1
LSI		Floppy
SAS
CTRL

S I/O		Slot2 PCI 33MHz	ITE	SAS-GPIO1
	JWD1		CTRL
		JWOL1		SAS-GPIO0

				LED4	JPA2
	JWOR1	JKEY1			USB2/3	SAS0	SAS1	SAS2	SAS3
			Slot1 PCI 33MHz
				System Status LED	USB4/5
COM2
			SIMLC		BPI2C

				IDE
SAS4	SAS5	SAS6	SAS7	JL1
				Fan 4

2-26