Chapter 2: Installation
Installation of the LGA 775 Processor
PnP Cap on top of the Load Plate
1.Press the load lever to release the load plate, which covers the CPU socket, from its locking position.
2.Gently lift the load lever to open the load plate.
Load Plate (with PnP Cap attached)
3.Use your thumb and your index fi n- ger to hold the CPU at the top center edge and the bottom center edge of the CPU.
4.Align CPU Pin1 (the CPU corner marked with a triangle) against the socket corner that is marked with a triangle cutout.
Top Center Edge
Triangle
Bottom Center Edge
golden dot
Socket Key
(Socket Notch)
CPU Key (semi- circle cutout) below the circle.
Corner with a |
|
triangle cutout | CPU Pin1 |
|
