NIC1/NIC2 LED Indicators
The NIC (Network Interface Control- ler) LED connection for GLAN 1 is located on pins 11 and 12 of JF1 and the LED connection for GLAN 2 is on Pins 9 and 10. Attach the NIC LED cables to display network activity. Refer to the table on the right for pin defi nitions.
GLAN 1 LED
Pin Defi nitions (JF1)
Pin# Defi nition
11LED_Anode+
12NIC1 LED Signal
GLAN 2 LED
Pin Defi nitions (JF1)
Pin# Defi nition
9LED_Anode+
10NIC1 LED Signal
HDD LED
The HDD LED connection is located on pins 13 and 14 of JF1. Attach the hard drive LED cable here to display disk activity (for any hard drives on the system, including SAS, Serial ATA and IDE, if available). See the table on the right for pin defi nitions.
HDD LED
Pin Defi nitions (JF1)
Pin# Defi nition
13+5V
14HD Active
A. HDD LED
B. NIC1 LED
C. NIC2 LED
Header Pins
Ground
X
Power LED
AHDD LED
BNIC1 LED
CNIC2 LED
Blue_LED_Cathode (UID)/Vcc
PWR Fail LED
Ground
Ground
20 19
NMI
X
Vcc
UID Switch/Vcc
Vcc
Vcc
OH/Fan Fail/
PWR Fail/UID LED
Vcc |
|
Reset | FP Reset Button |
PWR | FP Power Butto |
21
