SUPER MICRO Computer X7SBL-LN1/LN2 guide

Appendix B: BIOS POST Codes

Appendix B

Installing the Windows OS

After all hardware components have been installed, you must ﬁ rst conﬁ gure Intel South Bridge RAID Settings before you install the Windows OS and other software drivers. To conﬁ gure RAID settings, please refer to RAID Conﬁ guration User Guides posted on our website at www.supermicro.com/support/manuals.

B-1 Installing the Windows XP/2000/2003 OS for Systems with RAID Functions

1.Insert Microsoft's Windows XP/2000/2003 Setup CD in the CD Driver, and the system will start booting up from CD.

2.Press the <F6> key when the message-" Press F6 if you need to install a third party SCSI or RAID driver" displays.

3.When the Windows XP/2000/2003 Setup screen appears, press "S" to specify additional device(s).

4.Insert the driver diskette-"Intel AA RAID XP/2000/2003 Driver for ICH9R" into Drive A: and press the <Enter> key.

5.Choose the Intel(R) ICH9R SATA RAID Controller from the list indicated in the XP/2000/2003 Setup Screen, and press the <Enter> key.

6.Press the <Enter> key to continue the installation process. (If you need to specify any additional devices to be installed, do it at this time.) Once all devices are speciﬁ ed, press the <Enter> key to continue with the installation.

7.From the Windows XP/2000/2003 Setup screen, press the <Enter> key. The XP/2000/2003 Setup will automatically load all device ﬁ les and then, continue the Windows XP/2000/2003 installation.

8.After the Windows XP/2000/2003 OS Installation is completed, the system will automatically reboot.

B-1

Image 89

SUPER MICRO Computer X7SBL-LN1/LN2 user manual Appendix B Installing the Windows OS

Contents

X7SBL-LN1/LN2 Manual Revision 1.0c Release Date February 6 Conventions Used in the Manual About This ManualManual Organization Table of Contents Troubleshooting Bios Overview Checklist Asia-Paciﬁ c HeadquartersEurope X7SBL-LN1/LN2 Image Important Notes to the User Motherboard Layout JPUSB1/JPUSB2 X7SBL-LN1/LN2 Quick Reference Motherboard Features Temperature Acpi FeaturesDimensions Onboard I/O Intel 3200 Chipset System Block Diagram Block Diagram Memory Controller Hub MCH Intel ICH9R System FeaturesChipset Overview Environmental Temperature Control Special FeaturesRecovery from AC Power Loss PC Health Monitoring Virtualization Technology Acpi FeaturesCPU Overheat LED and Control System Resource Alert Super I/O Slow Blinking LED for Suspend-State Indicator Precautions Motherboard InstallationStatic-Sensitive Devices Unpacking Installation Overview Processor and Heatsink Installation Triangle Installation of the LGA 775 ProcessorPage Installation of the Heatsink Removal of the Heatsink Memory Support Installing DIMMsDimm Installation Top View of DDR2 Installing and Removing DIMMs Back Panel Connectors/IO Ports Control Panel Connectors/IO PortsBack Panel Connectors Back Panel I/O Port Locations and Deﬁ nitions Front Control Panel Header Pins Front Control Panel Pin Deﬁ nitions NMI Button Power LED HDD LED NIC1/NIC2 LED Indicators Overheat/Fan Fail LED OH Power Fail LED Power Button Reset Button Processor Power Connector Connecting CablesATX Power Connector Chassis Intrusion Universal Serial Bus USB Serial Ports ATX PS/2 Keyboard and PS/2 Mouse Ports PWR LED External Speaker/Internal Buzzer Glan Giga-bit Ethernet Ports VGA Connector Fan Headers Wake-On-LAN Wake-On-Ring Power SMB Connector Power Fault PWR Supply Failure Explanation of Jumpers Jumper SettingsGlan Enable/Disable Clear Cmos Watch Dog Enable/Disable PCI/PCI-E Slots to SMB Speeds VGA Enable/Disable Force-Power-On Enable/Disable USB Wake-Up Glan LEDs Onboard Indicators Onboard Power LED LE1 9Floppy and SIM 1U Ipmi Connections Floppy Connector SIM 1U Ipmi X7SBL-LN1/LN2 User’s Manual No Power Troubleshooting ProceduresBefore Power On No Video Memory ErrorsLosing the System’s Setup Conﬁ guration Technical Support Procedures Question What type of memory does my motherboard support? Frequently Asked Questions Returning Merchandise for Service X7SBL-LN1/LN2 User’s Manual How To Change the Conﬁ guration Data System BiosStarting the Setup Utility Introduction Main Bios Setup Running Setup System Time Main Bios Setup Menu ΥMain Setup FeaturesSystem Date Legacy Diskette a Bios Revision Bios DateHard Disk Pre-Delay Native Mode Operation Type Sata Ahci Legacy EnableΥIDE Channel 0 Master/Slave/SATA Port2/SATA Port3 CHS Format LBA Mode ControlLBA Format Multi-Sector Transfers Ultra DMA Mode Transfer ModeInstalled Memory Bit I/O ΥBoot Features Advanced SetupQuiet Boot QuickBoot Mode Acpi Mode Post ErrorsPower Button Behavior Resume On Modem Ring ΥAdvanced Processor Options Power Loss ControlWatch Dog Summary Screen Hyperthreading Available when supported by the CPU C1 Enhanced Mode Available when supported by the CPU Intel Virtualization Technology Available when supported bySet Maximum Ext. CPUID=3 Echo TPR CPU and the OS Clock Spectrum FeatureΥAdvanced Chipset Control High Precision Event Timer Enable VT-DMemory Remapping Route Port 80h Cycles to Cache Video Bios Area Cache System Bios AreaΥMemory Cache Cache Base 0-512K ΥPCI32 Slot#1 PCI32 Slot#2 ΥPNP Conﬁ guration ΥSlot 4 PCI-Exp ΥSlot 3 PCI-Exp ΥI/O Device Conﬁ guration ΥOnboard LAN 1 and Onboard LAN Serial Port a KBC Clock InputBase I/O Address Interrupt ΥDMI Event Logging ΥHardware Monitoring ΥConsole Redirection CPU Overheat Alarm CPU Temperature Fan Speed Control Modes System TemperatureFan1 Fan Voltage Monitoring Security Settings User Password Is Supervisor Password IsSet Supervisor Password Set User Password Boot Priority Order/Excluded from Boot Orders Boot Settings Exit Load Setup DefaultsExit Saving Changes Exit Discarding Changes Save Changes Discard ChangesPage Recoverable Post Error Beep Codes Appendix a Bios Error Beep CodesPage Appendix B Installing the Windows OS Page Appendix C Installing Other Software Programs and Drivers Conﬁ guring Supero Doctor Supero Doctor III Interface Display Screen-II Remote Control Page Disclaimer