Declination, Time-out | Suunto None manual

HOLD THE

DEVICE LEVEL

AND SLOWLY

ROTATE 360°.

HOLD THE

DEVICE STILL

AND SLOWLY

TILT 90°

VERTICALLY.

If the calibration fails several times in a row, it is possible that you are in an area with sources of magnetism, such as large metal objects, power lines or electric appliances. Move to another location and try to calibrate the compass again. If the calibration continues to fail, contact an authorized Suunto service center.

Declination

You can compensate for the difference between true north and magnetic north by adjusting the compass declination. The declination can be found, for example, from sea charts or topographic maps of the local area.

ADJUST WITH UP AND

DOWN BUTTONS. ACCEPT

WITH SELECT BUTTON.

Time-out

You can set the compass time-out to 1, 3, or 5 minutes. After the set time has passed from the latest button press, the dive computer returns to the TIME or DIVE mode from the COMPASS mode.

ADJUST WITH UP AND

DOWN BUTTONS. ACCEPT

WITH SELECT BUTTON.

You can exit the COMPASS mode also by long pressing the SELECT button.

15

Image 15

Suunto None manual Declination, Time-out

Contents

COBRA3 Time Tank pressure Before Diving Intellectual Property Welcome to the World of Suunto Diving Instruments That tend to increase the risk of decompression illness DCI Before DIVING. Make sure that you fully understand the useSerious injury or death Not for Professional USE! Suunto dive computers are Dives That Require Decompression Stops are not Before the instrument has counted down the no-fly time Nitrox mode, as well as from AIR or Nitrox mode to GaugeMode even during the no-fly time Batteries. Recycle or dispose of used batteries properly Navigating in the menus Button symbols and functionsSymbol Button Press Main functions Suunto AT a Glance Down Setting the date Time mode settingsSetting the alarm Setting the time AC water contacts Setting the unitsSetting the backlight Setting the tones Locking a bearing Learning how to use your compassDisplays by pressing the UP/DOWN buttons Compass display Symbol Explanation Compass settingsCalibration Time-out Declination Dive computer limitations Before DivingSuunto RGBM/Deep Stop Algorithm Emergency ascents Nitrox Audible and visual alarmsAlarm type Preset alarm types Alarm type Omitted decompression Alarm type Alarm reasonAlarm is activated Error conditions Setting the dive-time alarm Connecting Suunto Cobra3 to a regulatorDive mode settings Setting the depth alarm Are stored until changed Setting the nitrox valuesSetting the personal/altitude adjustments Bottom time, for example Setting the tank pressure alarm Setting the sample rateSetting the Safety Stops/Deep Stops Setting the Rgbm values Accessing Dive mode Dive mode activationActivation and pre-checks How the Altitude value is set Battery power indicationAlt. adjustment value Altitude range Diving at altitude Personal adjustments Personal Condition Desired tables Adjustment ValueRgbm setting Desired Tables Effect Safety Stops Recommended Safety StopsMandatory Safety Stops Deep stops Basic dive data Diving in AIR mode DIVEairDiving Order to perform the necessary dive pre-checks Tank pressure data Bookmark Ascent rate indicator Low Air Pressure WarningsDecompression dives Display below the floor Ceiling, ceiling zone, floor and decompression range Display above the floor Display at the ceiling zoneDisplay above the ceiling Oxygen displays Diving in Nitrox mode DIVEnitroxBefore diving in Nitrox mode Default nitrox settings Diving in Gauge mode DIVEgauge Oxygen limit fraction OLFGas change and multiple breathing gas mixes Gauge mode does not provide decompression information There is no ascent rate monitoring in the Gauge modeModes before the no fly time has counted down Dive numbering Alarms Symbol on displayAfter Diving Surface interval Plan mode Dive Planning mode PLANnodecFlying after diving Dive Simulator Simulation Mode PLANsimulatorMode Dive numbering shown during dive planning Dive logbook MEMLogbook Memory mode Numbering for further information Providing that the battery has been replaced according toInstructions Dive series if the no-fly time has not ended. See .2. Dive Suunto Dive Manager SDM Unit and the downloadable Suunto Dive Manager softwarePage Water Contacts and Push Buttons Care and Maintenance of MY Suunto Diving Computer FAQs Battery replacement and strap kits must be usedWarranty Required tools Battery ReplacementBattery kit Replacing the battery Battery compartment lid, indicating a leak Technical Data Suunto Rgbm adaptive decompression Rgbm No-decompression limits Diver Attention Symbol Advice to Extend Surface Interval Oxygen exposure Altitude diving Intellectual Property Copyright TrademarkPatent notice Disclaimers User’s responsibility12.2. CE Exclusions and Limitations Warranty Period Access to Suunto warranty service Other important noticesLimitation of Liability Page Disposal of the Device EAD EAN Glossary Noaa Copyright Customer Service Contacts TWO Year Warranty Suunto Oy 9/2008, 10/2008, 11/2008