Manuals / Suunto / Fitness & Sports / Watch

Suunto None manual Suunto AT a Glance, Navigating in the menus, Button symbols and functions

Models: None

1 60

Download 60 pages 37.09 Kb

Page 9

3. SUUNTO AT A GLANCE

3.1. Navigating in the menus

Suunto Cobra3 has four main operating modes - TIME mode (TIME), DIVE mode (DIVE), PLAN mode (PLAN), and MEMORY mode (MEMORY) – as well as the COMPASS submode, which can be activated from either TIME or DIVE modes. To toggle between the main modes, press the MODE button. To select a submode in DIVE, PLAN and MEMORY modes, press the UP/DOWN buttons.

3.2. Button symbols and functions

The table below explains the main functions of the dive computer's buttons. The buttons and their use are explained in more detail in the relevant sections of the manual.

Table 3.1. Button symbols and functions

Symbol	Button	Press	Main functions
	MODE	Short	Switch between main modes
			Switch from submode to main mode
			Activate backlight in DIVE mode
	MODE	Long	Activate backlight in other modes
	SELECT	Short	Select a submode
			Select and accept settings
	SELECT	Long	Activate compass in TIME and DIVE modes
	UP	Short	Toggle between alternative displays
			Change submode
			Increase values

9

Image 9

Suunto None Suunto AT a Glance, Navigating in the menus, Button symbols and functions, Symbol Button Press Main functions

Contents

COBRA3 Time Tank pressure Before Diving Intellectual Property Welcome to the World of Suunto Diving Instruments Serious injury or death Before DIVING. Make sure that you fully understand the useNot for Professional USE! Suunto dive computers are That tend to increase the risk of decompression illness DCIDives That Require Decompression Stops are not Mode even during the no-fly time Nitrox mode, as well as from AIR or Nitrox mode to GaugeBatteries. Recycle or dispose of used batteries properly Before the instrument has counted down the no-fly timeSymbol Button Press Main functions Button symbols and functionsSuunto AT a Glance Navigating in the menusDown Setting the alarm Time mode settingsSetting the time Setting the dateSetting the backlight Setting the unitsSetting the tones AC water contactsDisplays by pressing the UP/DOWN buttons Learning how to use your compassCompass display Locking a bearingSymbol Explanation Compass settingsCalibration Time-out DeclinationSuunto RGBM/Deep Stop Algorithm Before DivingEmergency ascents Dive computer limitationsAlarm type Audible and visual alarmsPreset alarm types Alarm type NitroxAlarm is activated Alarm type Alarm reasonError conditions Omitted decompressionDive mode settings Connecting Suunto Cobra3 to a regulatorSetting the depth alarm Setting the dive-time alarmSetting the personal/altitude adjustments Setting the nitrox valuesBottom time, for example Are stored until changedSetting the Safety Stops/Deep Stops Setting the sample rateSetting the Rgbm values Setting the tank pressure alarmAccessing Dive mode Dive mode activationActivation and pre-checks Alt. adjustment value Altitude range Battery power indicationDiving at altitude How the Altitude value is setPersonal adjustments Personal Condition Desired tables Adjustment ValueRgbm setting Desired Tables Effect Safety Stops Recommended Safety StopsMandatory Safety Stops Deep stops Diving Diving in AIR mode DIVEairOrder to perform the necessary dive pre-checks Basic dive dataTank pressure data BookmarkAscent rate indicator Low Air Pressure WarningsDecompression dives Display below the floor Ceiling, ceiling zone, floor and decompression rangeDisplay above the floor Display at the ceiling zoneDisplay above the ceiling Before diving in Nitrox mode Diving in Nitrox mode DIVEnitroxDefault nitrox settings Oxygen displaysDiving in Gauge mode DIVEgauge Oxygen limit fraction OLFGas change and multiple breathing gas mixes Gauge mode does not provide decompression information There is no ascent rate monitoring in the Gauge modeModes before the no fly time has counted down After Diving Alarms Symbol on displaySurface interval Dive numberingPlan mode Dive Planning mode PLANnodecFlying after diving Mode Simulation Mode PLANsimulatorDive numbering shown during dive planning Dive SimulatorDive logbook MEMLogbook Memory modeInstructions Providing that the battery has been replaced according toDive series if the no-fly time has not ended. See .2. Dive Numbering for further informationSuunto Dive Manager SDM Unit and the downloadable Suunto Dive Manager softwarePage Water Contacts and Push Buttons Care and Maintenance of MY Suunto Diving ComputerFAQs Battery replacement and strap kits must be usedWarranty Battery kit Battery ReplacementReplacing the battery Required toolsBattery compartment lid, indicating a leak Technical Data Suunto Rgbm adaptive decompression RgbmNo-decompression limits Diver Attention Symbol Advice to Extend Surface IntervalOxygen exposure Altitude divingIntellectual Property Copyright TrademarkPatent notice Disclaimers User’s responsibility12.2. CE Exclusions and Limitations Warranty PeriodAccess to Suunto warranty service Other important noticesLimitation of Liability Page Disposal of the Device EAD EAN GlossaryNoaa Copyright Customer Service ContactsTWO Year Warranty Suunto Oy 9/2008, 10/2008, 11/2008