Memory mode, Dive logbook MEMLogbook

PRESS UP OR

DOWN BUTTONS

TO DESCEND OR

ASCEND.

The mode can also be used to add the desired surface intervals for dive simulations. Add the desired surface interval increments to the present surface interval by pressing the UP and DOWN buttons.

ADD SURFACE TIME IN

15 MINUTES INCREMENTS.

7.6. MEMORY mode

The memory options include a dive logbook (MEMLogbook) and dive history (MEMHistory).

The dive time and date are registered in the Logbook memory. Always check before diving that the time and date are correctly set, especially after traveling between different time zones.

7.6.1. Dive logbook (MEMLogbook)

The Suunto Cobra3 has a very sophisticated, high capacity Logbook and Profile Memory. The data is recorded in the profile memory based on the selected sample rate.

The END OF LOGS text is displayed between the oldest and most recent dive. The following information will be shown on three pages:

Page 38

Image 38

Suunto None manual Memory mode, Dive logbook MEMLogbook

Contents

COBRA3 Time Tank pressure Before Diving Intellectual Property Welcome to the World of Suunto Diving Instruments Not for Professional USE! Suunto dive computers are Before DIVING. Make sure that you fully understand the useSerious injury or death That tend to increase the risk of decompression illness DCI Dives That Require Decompression Stops are not Batteries. Recycle or dispose of used batteries properly Nitrox mode, as well as from AIR or Nitrox mode to GaugeMode even during the no-fly time Before the instrument has counted down the no-fly time Suunto AT a Glance Button symbols and functionsSymbol Button Press Main functions Navigating in the menus Down Setting the time Time mode settingsSetting the alarm Setting the date Setting the tones Setting the unitsSetting the backlight AC water contacts Compass display Learning how to use your compassDisplays by pressing the UP/DOWN buttons Locking a bearing Calibration Symbol ExplanationCompass settings Declination Time-out Emergency ascents Before DivingSuunto RGBM/Deep Stop Algorithm Dive computer limitations Preset alarm types Alarm type Audible and visual alarmsAlarm type Nitrox Error conditions Alarm type Alarm reasonAlarm is activated Omitted decompression Setting the depth alarm Connecting Suunto Cobra3 to a regulatorDive mode settings Setting the dive-time alarm Bottom time, for example Setting the nitrox valuesSetting the personal/altitude adjustments Are stored until changed Setting the Rgbm values Setting the sample rateSetting the Safety Stops/Deep Stops Setting the tank pressure alarm Activation and pre-checks Accessing Dive modeDive mode activation Diving at altitude Battery power indicationAlt. adjustment value Altitude range How the Altitude value is set Rgbm setting Desired Tables Effect Personal adjustmentsPersonal Condition Desired tables Adjustment Value Mandatory Safety Stops Safety StopsRecommended Safety Stops Deep stops Order to perform the necessary dive pre-checks Diving in AIR mode DIVEairDiving Basic dive data Bookmark Tank pressure data Decompression dives Ascent rate indicatorLow Air Pressure Warnings Ceiling, ceiling zone, floor and decompression range Display below the floor Display above the ceiling Display above the floorDisplay at the ceiling zone Default nitrox settings Diving in Nitrox mode DIVEnitroxBefore diving in Nitrox mode Oxygen displays Gas change and multiple breathing gas mixes Diving in Gauge mode DIVEgaugeOxygen limit fraction OLF Modes before the no fly time has counted down Gauge mode does not provide decompression informationThere is no ascent rate monitoring in the Gauge mode Surface interval Alarms Symbol on displayAfter Diving Dive numbering Flying after diving Plan modeDive Planning mode PLANnodec Dive numbering shown during dive planning Simulation Mode PLANsimulatorMode Dive Simulator Memory mode Dive logbook MEMLogbook Dive series if the no-fly time has not ended. See .2. Dive Providing that the battery has been replaced according toInstructions Numbering for further information Unit and the downloadable Suunto Dive Manager software Suunto Dive Manager SDMPage Care and Maintenance of MY Suunto Diving Computer Water Contacts and Push Buttons Warranty FAQsBattery replacement and strap kits must be used Replacing the battery Battery ReplacementBattery kit Required tools Battery compartment lid, indicating a leak Technical Data Rgbm Suunto Rgbm adaptive decompression Diver Attention Symbol Advice to Extend Surface Interval No-decompression limits Altitude diving Oxygen exposure Patent notice Intellectual PropertyCopyright Trademark 12.2. CE DisclaimersUser’s responsibility Warranty Period Exclusions and Limitations Limitation of Liability Access to Suunto warranty serviceOther important notices Page Disposal of the Device Glossary EAD EAN Noaa Customer Service Contacts Copyright TWO Year Warranty Suunto Oy 9/2008, 10/2008, 11/2008