Manuals / Suunto / Fitness & Sports / Watch

Suunto None manual Disclaimers, User’s responsibility, 12.2. CE

Models: None

1 60

Download 60 pages 37.09 Kb

Page 51

12. DISCLAIMERS

12.1. User’s responsibility

This instrument is intended for recreational use only. Suunto Cobra3 must not be used for obtaining measurements that require professional or industrial precision.

12.2. CE

The CE mark is used to mark conformity with the European Union EMC directive 89/336/EEC

FIOH, Topeliuksenkatu 41 a A, FI-00250 Helsinki, Finland, notified body no.0430, has EC type-examined this type of personal protective equipment.

EN 250 Respiratory equipment - Open circuit self-contained compressed air diving apparatus – Requirements, testing, marking.

The cylinder pressure gauge, and the parts of this product used in measuring the cylinder pressure, meet the requirements set in the section of the European Standard EN 250 that concern cylinder pressure measurements. The instruments must be serviced by an authorized Suunto representative every second year or after 200 dives (whichever comes first).

EN 13319 ”Diving accessories – Depth gauges and combined depth and time measuring devices – Functional and safety requirements, test methods” is a European diving depth gauge standard. The Suunto Cobra3 is designed to comply with this standard.

51

Image 51

Suunto None manual Disclaimers, User’s responsibility, 12.2. CE

Contents

COBRA3 Time Tank pressure Before Diving Intellectual Property Welcome to the World of Suunto Diving Instruments That tend to increase the risk of decompression illness DCI Before DIVING. Make sure that you fully understand the useSerious injury or death Not for Professional USE! Suunto dive computers areDives That Require Decompression Stops are not Before the instrument has counted down the no-fly time Nitrox mode, as well as from AIR or Nitrox mode to GaugeMode even during the no-fly time Batteries. Recycle or dispose of used batteries properlyNavigating in the menus Button symbols and functionsSymbol Button Press Main functions Suunto AT a GlanceDown Setting the date Time mode settingsSetting the alarm Setting the timeAC water contacts Setting the unitsSetting the backlight Setting the tonesLocking a bearing Learning how to use your compassDisplays by pressing the UP/DOWN buttons Compass displaySymbol Explanation Compass settingsCalibration Time-out DeclinationDive computer limitations Before DivingSuunto RGBM/Deep Stop Algorithm Emergency ascentsNitrox Audible and visual alarmsAlarm type Preset alarm types Alarm typeOmitted decompression Alarm type Alarm reasonAlarm is activated Error conditionsSetting the dive-time alarm Connecting Suunto Cobra3 to a regulatorDive mode settings Setting the depth alarmAre stored until changed Setting the nitrox valuesSetting the personal/altitude adjustments Bottom time, for exampleSetting the tank pressure alarm Setting the sample rateSetting the Safety Stops/Deep Stops Setting the Rgbm valuesAccessing Dive mode Dive mode activationActivation and pre-checks How the Altitude value is set Battery power indicationAlt. adjustment value Altitude range Diving at altitudePersonal adjustments Personal Condition Desired tables Adjustment ValueRgbm setting Desired Tables Effect Safety Stops Recommended Safety StopsMandatory Safety Stops Deep stops Basic dive data Diving in AIR mode DIVEairDiving Order to perform the necessary dive pre-checksTank pressure data BookmarkAscent rate indicator Low Air Pressure WarningsDecompression dives Display below the floor Ceiling, ceiling zone, floor and decompression rangeDisplay above the floor Display at the ceiling zoneDisplay above the ceiling Oxygen displays Diving in Nitrox mode DIVEnitroxBefore diving in Nitrox mode Default nitrox settingsDiving in Gauge mode DIVEgauge Oxygen limit fraction OLFGas change and multiple breathing gas mixes Gauge mode does not provide decompression information There is no ascent rate monitoring in the Gauge modeModes before the no fly time has counted down Dive numbering Alarms Symbol on displayAfter Diving Surface intervalPlan mode Dive Planning mode PLANnodecFlying after diving Dive Simulator Simulation Mode PLANsimulatorMode Dive numbering shown during dive planningDive logbook MEMLogbook Memory modeNumbering for further information Providing that the battery has been replaced according toInstructions Dive series if the no-fly time has not ended. See .2. DiveSuunto Dive Manager SDM Unit and the downloadable Suunto Dive Manager softwarePage Water Contacts and Push Buttons Care and Maintenance of MY Suunto Diving ComputerFAQs Battery replacement and strap kits must be usedWarranty Required tools Battery ReplacementBattery kit Replacing the batteryBattery compartment lid, indicating a leak Technical Data Suunto Rgbm adaptive decompression RgbmNo-decompression limits Diver Attention Symbol Advice to Extend Surface IntervalOxygen exposure Altitude divingIntellectual Property Copyright TrademarkPatent notice Disclaimers User’s responsibility12.2. CE Exclusions and Limitations Warranty PeriodAccess to Suunto warranty service Other important noticesLimitation of Liability Page Disposal of the Device EAD EAN GlossaryNoaa Copyright Customer Service ContactsTWO Year Warranty Suunto Oy 9/2008, 10/2008, 11/2008