SVAT ELECTRONICS
now you can see
13.2.1 Mounting
1.Plug the 4 pin DIN female connection on the camera into the 4 PIN DIN male connection on the 60ft video/power wire.
2.Match the two arrows on top of bothconnecting cables.
3.Plug the camera’s power supply into the power jack located on the 60ft video/ power wire.
4. Plug the camera’s power adapter into an AC outlet.
5. Connect the 60ft video/ power wire’s male RCA plug to the VIDEO IN port of your TV/ monitor/VCR/DVR.
6.If your VIDEO IN port is a BNC connection (common with DVR units), you will need to attach the BNC to RCA adapter before connecting the camera.
1.Screw the mounting bracket into the camera’s mounting hole, turning it clockwise.
2.Mount the camera in the desired location no more than 60 feet from the TV/Monitor/VCR/DVR unless you have purchased additional wiring. You may wall mount or desk mount these cameras.
3.Adjust cameras to the desired viewing angles.
1 |
| 2 |
|
|
|
3 |
| 4 |
|
|
|
5 |
| 6 |
|
|
|
CLEARVU4 | 44 |
