SVAT ELECTRONICS

now you can see

2.Press ENTER, and your DVR’s login window should pop up. If it does not pop up, your router is not properly forwarding the necessary port. This could be due to a number of problems including incorrect settings, presence of a firewall, or a DSL modem that has its own IP address.

If your DSL modem has its own internal IP address, it will not properly forward the necessary port. You may have to configure PPPoE settings in the DVR to match the settings provided to you by your Internet Service Provider (ISP). Consult your ISP for more information. SVAT technical support cannot troubleshoot modems, since changing these settings can potentially render your modem inoperable.

See section 9.2 Advanced Network Setup for PPPoE configuration instructions.

You should also check all your network connections and go through the above steps again to make sure a configuration error was not made.

7.6 Forwarding Outside Your Network.

Port Dynamic DNS

This section will explain how to associate your IP address with an easy-to-remember URL(domain name) 1. Open Internet Explorer and type in www.dyndns.com

2.The instructions on creating a dynamic DNS may have changed since the writing of this guide. Create a new account by clicking the link “Create Account”

3.Enter your preferred user name, email address, and password.

4.Do not worry about the optional information. Agree to the Terms of Service by checking the boxes. Click Create Account.

CLEARVU4

30

Page 35
Image 35
SVAT Electronics CLEARVU4 instruction manual Forwarding Outside Your Network