Sylvania 1000 C

P/N:4809628

05JUN03 v2.1 MusGT(4809628 v2.1) iv

IMPORTANT NOTES

Congratulations! You have purchased the

finest street supercharger available for the

Mustang GT. The centerpiece of this kit is

the High Efficiency PAXTON Supercharger, a

mechanically driven centrifugal blower.

This kit comes with all the parts you will need to

install the supercharger. The instruction manual has

been edited in order of sequence, and photographs

and drawings have been included to illustrate the

text. This will allow you quick part identification

and orientation.

The installation will require metric and SAE sock-

ets and wrenches, a hand drill and bits, an Air

Hammer (and compressor), a 3/8” x 18 NPT tap,

screwdrivers, and a supply of buckets for the

reserve of coolant and oils.

We suggest that you obtain a copy of a Mustang

shop manual for your model of car. This may be

obtained from your dealer, or may be ordered by

mail from Helm Publications at (800) 782-4356.

Become familiar with the details of your car’s sys-

tem. If it is not operating within normal parame-

ters, we do not recommend the installation or use

of the supercharger.

For the quickest installation time, we suggest that

you read this manual thoroughly before beginning.

Make sure that you understand the process, have

identified the areas of the car that you will be

working on, and have the tools that you will need

on hand. The average installation time is 8 to 10

hours, but your time will depend on your working

conditions, experience installing superchargers,

personal skill level, and preparedness for the job.

This estimate does not include time for the initial

vehicle inspection, cleaning, fine tuning, or trou-

ble-shooting. Once again, we recommend reading

the manual before beginning the process. We are

available for tech support at (805) 604-1336,

Monday through Friday, 7AM - 3 PM PST.

After reading the manual, verify that all major assembly groups are present in the main kit box. As you

remove a box or bag, note the identification label and compare it to the parts list.

PAXTON AUTOMOTIVE makes every effort to insure

that all parts are included in the box. If you

discover that you are missing any part,

or that a part was damaged in shipping, call PAXTON

immediately. DO NOT begin installation if a part

is missing. Failure to contact PAXTON priorto

beginning installation will result in a charge for

the missing part.

We suggest that the engine compartment be

cleaned before the installation. You can clean the

engine with a pressure washer that is found at self-

serve car washes. Use a safe-for-aluminum clean-

er/degreaser, and cover the distributor and any

electronics with a plastic bag to prevent water from

entering.