Sylvania HT6051FB owner manual Functions, Playback

Functions

Operations described in this section are mainly based on the remote control use. Some operations can be carried out on the front panel.

Playback

Before: Turn on the TV, the Subwoofer, the Wireless rear speaker and other equipment which are connected to the DVD/CD Player. Make sure the TV is set to the correct channel.

Functions

Normal Playback

DVD-V CD ( MP3 WMA ⇒Page 13)

1Press [DVD POWER] to turn on the DVD/CD Player.

2Insert a disc with label facing to the left (facing up for horizontal installation).

3Press [PLAY B] to start playback.

4Press [STOP C] to stop playback.

DVD POWER			AMP POWER
1	DVD	TUNER		2
			DISPLAY
1	2	3
			AUDIO
4	5	6
			SUBTITLE
7	8	9
CLEAR			ANGLE
	0	+10
SEARCH	PAUSE		SKIP
MODE
3		PLAY
4		STOP

Hint

•For playing back an MP3/WMA file, see page 13.

•A “prohibited icon” may appear at the top-right on the TV screen when the operation is prohibited by the disc or this player.

•Some DVDs may start playback from title 2 or 3 due to specific pro- grams.

•During the playback of a two-layered disc, pictures may stop for a moment. This happens while the 1st layer is being switched to the 2nd layer. This is not a malfunction.

•Don't leave the disc exiting halfway from the slot.

TIP:

You can change the On-Screen language in “PLAYER MENU” set- ting. (Refer to pages 17-18.)

DVD menu

Some discs contain menus which allow you to customize DVD playback. Use [K / L / s / B] to select an item, then press [ENTER] (or [PLAY B]), to select.

Calling Up a Menu Screen During Playback

•Press [MENU] to call up the DVD menu.

•Press [TOP MENU] to call up the title menu.

Paused and Step-by-Step Playback

DVD-V CD MP3 WMA

Press [PAUSE F] during playback.

To continue playback, press [PLAY B].

DVD-V

The disc goes forward by one frame each time [PAUSE F] is pressed during the pause mode.

To continue playback, press [PLAY B].

Hint

•On DVDs, set “STILL MODE” to “FIELD” in the Display menu if pic- tures in the pause mode are blurred. (Refer to pages 17-18.)

Fast Forward/Reverse Search

DVD-V	CD	MP3	WMA
Press [FWD g] or [REV h] repeatedly during play-				E 1
back to select the required forward or reverse speed.
To continue playback, press [PLAY B].

Hint

•For DVDs, fast forward or reverse search speed is different depending on the disc. Approximate speed is 1(x2), 2(x8), 3(x20), 4(x50) and 5(x100).

•For Audio CDs, approximate speed is 1(x2), 2(x8) and 3(x30).

•For MP3/WMA, approximate speed is 1(x2), 2(x8) and 3(x30).

Slow Forward/Slow Reverse

DVD-V

Press [FWD g] or [REV h] repeatedly
	1
during the pause mode to select the required
forward or reverse speed.
To continue playback, press [PLAY B].

Hint

•Slow forward or reverse speed is different, depending on the disc. Approximate speed is 1(1/16), 2(1/8) and 3(1/2).

•Set “STILL MODE” to “FIELD” in the Display menu if pictures in the slow playback mode are blurred. (Refer to pages 17-18.)

Hint

•Menu operations may vary depending on the disc. Refer to the manual accompanying the disc for more details.

Resume

Rapid Play

DVD-V

Rapid Play function is available only during playback. Available only on discs recorded in the Dolby Digital format, Rapid Play plays back in a slightly faster/ slower speed while

DVD-V CD MP3

Press [STOP C]. Resume message will appear on the TV screen.

Press [PLAY B], playback will resume from the point at which playback was stopped.

WMA

Resume ON

Press 'PLAY' to play from here. To play the beginning,

press 'STOP' first and then 'PLAY'.

<Example : DVD>

keeping the sound quality just as normal playback.

•Press [MODE] during the normal playback.

•Use [ENTER] or [s / B] to switch among (x1.3),

(x0.8) and OFF.

: Plays back approximately at 0.8 times of normal playback.

: Plays back approximately at 1.3 times of normal playback. OFF : No effects.

•Press [PLAY B] to continue the normal playback.

Hint

•To cancel resume, press [STOP C] one more time during the stop mode.

•For MP3/WMA, playback will resume from the beginning of the track at which playback was stopped.

•The resume information will be kept even when the power is turned off.

Hint

•Audio (language) setting cannot be changed while using this mode.

•Dolby Pro Logic II and Black Level settings cannot be changed while using this mode.

•This feature may not work at some point in a disc.

– 12 – EN