Sylvania HT6051F AV Receiver, AM / FM Radio, Preset Radio Stations, Selecting Radio Stations

Models: HT6051FB HT6051F

1 28
Download 28 pages 5.91 Kb
Page 21
Image 21

 

AV Receiver

AM / FM Radio

 

To Connect AM/FM Antenna

 

To connect AM Antenna:

To connect FM Antenna:

1 Fix the antenna holder as shown.

1 Connect the supplied FM antenna to the FM jack

 

 

on back of the AV Receiver. Extend the FM

 

antenna wire and fix its end to the wall.

2Connect the supplied AM antenna to the AM jack on back of the AV Receiver, then position it to receive the clearest sound.

AM Antenna

AV Receiver

FM Antenna

AV Receiver

Hint

Do not place the AM antenna on top of the player, the receiver or the speakers. Keep it as far as possible from other equipment.

For better FM reception, connect an outdoor FM antenna (not supplied) to the FM jack (75).

Preset Radio Stations

1 Press [AMP POWER] to turn on the AV Receiver. 2 Press [TUNER] to select Tuner mode. The current

radio frequency (station number) will appear on the display of the AV Receiver.

3 Press [REPEAT/BAND] to select FM or AM.

4 Use [TUNING o / p] to select the station you want to preset.

5 Press [SETUP] for 1 second. Preset number will flash.

6 Use [SKIP H / G] and select a preset number, then press [SETUP].

Hint

You can store up to 40 preset radio stations.

If you want to delete a preset radio station, use [SKIP H / G] to select the preset number, press and hold [SETUP]. When the preset number flashes, press [CLEAR].

If the sound is distorted during AM recep- tion, use [TUNING o / p] on the remote control to reduce the noise. This is effective only for the current AM station. This does not work for every situation. There may be interference from other electrical appliance or weak AM signals.

AV Receiver

Selecting Radio Stations

1 Press [AMP POWER] to turn on the AV Receiver.

2 Press [TUNER] to select Tuner mode. The current radio frequency (station number) will appear on the display.

3 Press [REPEAT/BAND] to select FM or AM.

4 Use [SKIP H / G] to select a preset radio station.

5 Use [TUNING o / p] to change the radio frequency.

6 Press and hold [TUNING o / p] for 2 seconds for search mode. The next available station will be tuned.

Hint

[SKIP H / G] will not function if there is no preset radio station.

– 21 –

EN

Page 21
Image 21
Sylvania HT6051FB owner manual AV Receiver, AM / FM Radio, Preset Radio Stations, Selecting Radio Stations