Sylvania HT6051F Audio Setting, Balance, Use K / L to select the speaker to set, then press Enter

C AUDIO Setting

Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 17.

4 Select the desired item.

or

5

DRC (Dynamic Range Control):

(Default: ON)

Set to “ON” to compress the range between soft and loud sounds.

6To exit the menu.

SETUP

AUDIO menu
AUDIO
DRC	ON
DELAY TIME
BALANCE
ENTER

DRC	ON	OFF
DELAY TIME		ENTER
BALANCE

DELAY TIME:

		DELAY TIME
DRC	ON	DISTANCE	FEET
DELAY TIME		FRONT(L/R)	10ft
BALANCE		CENTER	10ft
		SURROUND	10ft
		DEFAULT	ON

Select the desired setting.

ENTER

or

Hint

DELAY TIME:

• It is not possible to adjust

this item if CENTER and

SURROUND have been

set to “NONE” in the

SPEAKER SIZE setting.

• When “DEFAULT” is

selected and [ENTER] is

ENTER

BALANCE:

DRC DELAY TIME

BALANCE

ON

ENTER

(See C -1 below for more details.)

		Select the
		desired
BALANCE		setting.
TEST	0db	ENTER
FRONT(L)		or
CENTER	0db
FRONT(R)	0db
SUB WOOFER	0db
SURROUND(R)	0db
SURROUND(L)	0db

pressed, all the items are

restored to their factory

default settings.

BALANCE:

• While the test tone is

being output, the channel

balance adjustment can

not be made.

• When test is selected, no

test tone will be output

(See C -2 below for more details.)

from Subwoofer.

C-1 : DELAY TIME

With 5.1-channel surround sound, ideally the distance between the listening position and all the speakers (exclude Subwoofer). The delay time setting can be used to make the sound from the different speakers reach the listening position at the same time.

C -2 : BALANCE

When the channel level differs from each speaker, the adjustment can be made in the player of dB (-12dB to 0dB).

Functions

Use [K / L] to select the setting item, then press [ENTER].

• Using [K / L] select the speaker to set, then press [ENTER].

DISTANCE (Default :FEET):

•METERS (when [ENTER] is pressed):

The Speaker Unit of distance is set to meters (“m”).

•FEET (when [ENTER] is pressed):

The Speaker Unit of distance is set to feet (“ft”).

FRONT(L/R), CENTER, SURROUND (DEFAULT : 10FT):

•FRONT(L/R):

The distance can be set within the range of 0 to 60 feet.

•CENTER, SURROUND:

These are depends on the setting value of FRONT (L/R).

Hint

•The wireless transfer time of the rear speaker may affect the delay time setting.

TEST:

•Use [K / L] to select “TEST”, then press [ENTER]. The test tone will out- put from each speaker in turn.

CHANNEL LEVEL:

•Use [K / L] to select the speaker to set, then press [ENTER].

•Use [K / L] to select the desired level for each to select the desired level for each speaker, then press [ENTER].

TEST

FRONT(L) 0db

CENTER 0db FRONT(R) -1db SUB WOOFER 0db SURROUND(R) -2db SURROUND(L) -5db

FRONT(L)

0db -1db -2db -3db -4db -5db

« DELAY TIME setting for Dolby Digital »	« DELAY TIME setting for Dolby Pro Logic II »
10 ms 5 ms	25 ms 20 ms 15 ms

(FEET)	40													0 ms
	35													0 ms
SPEAKERS
	30					m								0 ms
					s
	25			0	m	s								0 ms
REAR					0		s
	20					0	m	s						-5 ms
							5
								m	s
FROM	15							10	m	s	s			-10 ms
									15	m
DISTANCE	10									15	m			DIFFERENTIAL
												s		ARRIVAL TIME
											15	m
	5													PREFERRED
	0													ACCEPTABLE
	0	5	10		15		20		25		30	35	40	NOT RECOMMENDED
		DISTANCE FROM FRONT SPEAKERS (FEET)
USABLE SPEAKER PLACEMENT RANGE WITH												XX ms	DELAY TIME

(FEET)	40													10 ms
	35													10 ms
SPEAKERS	30			s		m								10 ms
			0	m	s
			1
	25			0	m	s								10 ms
				1
REAR					10		s
	20					0	m	s						5 ms
							5
						1
							1	m	s
FROM	15							0	m	s
									5
								2
									2	m	s
														DIFFERENTIAL
DISTANCE	10									5	m
														ARRIVAL TIME
										2
	5													PREFERRED
	0													ACCEPTABLE
	0	5	10		15		20		25		30	35	40	NOT RECOMMENDED
		DISTANCE FROM FRONT SPEAKERS (FEET)
USABLE SPEAKER PLACEMENT RANGE WITH												XX ms	DELAY TIME

– 19 – EN