Communications 4-13
7. Connect the mobile computer to the accessory being used for communication.
8. Power on the mobile computer.
9. If a partnership was already created between the host computer and mobile computer,
synchronization occurs automatically upon connection.
Ethernet Communication Setup
To establish a connection between the mobile computer and the host computer to communicate over
an Ethernet network, perform the following:
Install MobileDox Cradle Manager
Install eConnect
Mobile computer configuration
Host computer configuration
DHCP server configuration
Cradle configuration.

Installing MobileDox Cradle Manager

MobileDox Cradle Manager is used only when establishing a connection
using the Four Slot Ethernet cradle.
The Cradle Management software features:
View cradles that are attached to the network via MobileDox Net
View cradle status
Modify cradle settings including:
IP address settings
DNS and WINS settings
Identification settings
USB port specific settings
Restart cradles connected to the network via MobileDox Net
Update the firmware of MobileDox Net.
Note