MC9000-G with Windows® Mobile 2003 Software for Pocket PCs PRG
8-24
Cable Adapter ModuleThis section describes how to set up and use the snap-on CAM with the mobile computer. The CAM
snaps on to the bottom of the mobile computer and can be easily removed when not in use.
Figure 8-17. Cable Adapter Module
When attached to the mobile computer, the CAM can perform the following functions.
• Provides power for operating the mobile computer, with the appropriate power connection.
• Provides serial connection through the serial pass-through port for communication with a
serial device, such as a host computer. For communication setup procedures, see Serial
Communication Setup on page 4-9.
• Provides USB connection through the USB pass-through port for communication with a USB
device, such as a host computer. For communication setup procedures, see Serial
Communication Setup on page 4-9.
• Charges the mobile computer’s battery, when used with the appropriate power supply.
Latches
Power Port
Communications Port
Pogo Pin Pass-through
Connector
Latch Grip