3-2
SPS 3000 Series Programmer’s Guide
Installing ActiveSync Software
To install ActiveSync on your desktop computer, follow the installation instructions on the
ActiveSync CD. During installation you can set up the types of in formation (e.g., files,
E-mail, databases) to synchronize as well as the Sync Mod e (Continuously while the iPAQ
is connected, Only upon connection, or Manually).

Verifying an ActiveSync Connection

When a proper ActiveSync connection has taken place between the iPAQ and the desktop
computer, the ActiveSync icon on the desktop computer turns green.

Performing a Remote ActiveSync

You can also synchronize your iPAQ remotely using a WLAN connection. Refer to Using
ActiveSync over Spectrum24 on page 4-25 for information about setting up an ActiveSync
connection via a WLAN.

Performing Subsequent ActiveSync Operations

After you set up ActiveSync for the first time, subsequent Act iveSync operations only
require a connection between your iPAQ and your desktop computer. To connect, place
your iPAQ in a cradle that is connected to your desktop, connect the synchronization cable
directly from your iPAQ to the desktop, or connect via a Wireless Local Area Network
(WLAN).
A WLAN connect will require additional set up (see Using ActiveSync over Spectrum24 on
page 4-25).