Tanaka TBC-340/D, TBC-2510, TBC-250PF/PFD, TBC-340PF/PFD, TBC-2501, TBC-300/SDH3010, TBS270PF/PN

TBC-250/250PF/PFD,TBC-2501,TBC-2510,TBC-270PF/PFD

TBC-270PN/PND,TBC-300/SDH/3010,TBC-340/D,TBC-340PF/D

When using a trimmer head (Fig.1-9B) with two-piece type blade guard, attach the guard extension to the blade guard. (Fig. 1-9)

Then locate the guard above the angle transmission. (Fig. 1-9B)

NOTE!

If your unit has guard location label on drive shaft tube, follow the indication.

NOTE!

To remove the guard extension, refer to the drawings. Wear gloves as the extension has a sharp line limiter, then push the four square tabs on the guard one by one in order. (Fig. 1 -9C)

Owner’s Manual

www.tanaka-usa.com 7 custsvc@tanaka-ism.com